EasyGate Analog GSM Gateway - 501300AU

2N EasyGate is a single-channel analog GSM Gateway that provides a cost-effective method of communication by giving the user an opportunity to save costs on calls to a GSM network. Easygate Analog is ideal for small and medium size companies. It is not only a tool for call cost reduction - connected to a PBX and a network PC, EasyGate can provide other communication solutions such as send/receive SMS and analog fax messages, internet browsing and emailing via GPRS and with the FSK feature you can see the calling party on your phone. Easygate devices are often used as a back-up Internet connection for small offices or as a primary Internet connection on boats or in rural areas. This analog GSM /3G gateway can be applied in areas with no PSTN lines or power supply networks as it may be supplied from any 12V battery (e.g. 2N Energy Bank), which makes the device fully mobile. Automatic SMS message sending can be activated by external signal. Optional SMS Client/Server software is available for comprehensive PC-based SMS send and receive tools Easygate is designed and manufactured with a maximum emphasis on sound quality, reliability and long lasting performance. EasyGate can be installed within a few minutes and its installation requires no special technical skills.

Click to Enlarge Image

Product Features

Product Specification

GSM ~ GSM network types supported: 850/900/1800/1900 MHz ~ GSM modules: Siemens MC45/55; Siemens MC46/56, Siemens MC39i ~ SIM card: 3V ~ Transmitter output power: maximum 2 W ~ Receiver sensitivity: -104 dBm Supported Connections ~ Voice call ~ CSD data connection ~ GPRS class 10 data connection ~ SMS message, Send and receive ~ PC fax support (not for analog faxes) Antenna ~ Connector type: SMA ~ Impedance: 50 Ohm Power Supply ~ Adapter: 100-240V/12V; 0,5 A ~ Optional connection to external voltage source: 10-16V (accumulator 12V) Consumption by power supply: 12V ~ Stand-by consumption: 70mA ~ Typical power consumption during a call: 200mA ~ Maximal power consumption during a call: 300mA Line Interface ~ Calling party Identification: transmission of a CLI in ETSI FSK standard during ringing ~ Interface type: 2-wire, FXS for PBX CO line ~ Connector type: RJ12, 6/2 ~ Line Impedance: 600 Ohm ~ Loop voltage: 24V DC ~ Maximal line current (short-circuit): 40mA ~ Ringing voltage: 42 Vef, 50Hz (25Hz version is possible) ~ Dialling modes Supported: DTMF and Pulse ~ Answer supervision via polarity reversal ~ Tariff pulses: 16/12kHz Data Interface ~ Data interface: RS-232 ~ Connector: D-Sub 9, female ~ Transmission rate: 9600-115200 bit/sec, autobauding Physical ~ Dimensions: 170mm(H) x 130mm(W) x 45mm(D) ~ Operating temperature: 0 - 45°C ~ Signalling of actual status: 3x LEDs - Power, GSM network connection, line status

Ordering Information

Other Product Resources