|
Edgecore Layer 3 Standalone Fast Ethernet SwitchThe ES3628EA is a 24 port Fast Ethernet Routing switch. It offers 24x 10/100Mbps RJ-45 ports, 2x Gigabit Ethernet RJ-45 ports and 2x SFP (mini-GBIC) slots. It combines the speed and low cost of a Layer 2 switch with the ability to route at a Layer 3 level and provides comprehensive network management features including: spanning tree protocol, GVRP for VLAN configuration, SNMP, RMON and web management.
The ES3628EA switch offers industry leading Security features such as ACLs, RADIUS, TACACS+, SSH - Secure Telnet, HTTPS/SSL, and IEE 802.1x authenticated port security.
Increased application performance and better bandwidth utilization can be expected through wirespeed routing with a non-blocking architecture. The Layer 3 routing capability includes RIP I/II, OSPF, IGMP v1/2, DVMRP and PIM-DM and more. All of this helps alleviate unwanted backbone congestion and provides enhanced network security.
The Switch supports enhanced reliability via an optional 19inch rackmount Redundant Power Supply unit. This unit can supply redundant power to four ES series Switches from the one unit. A DC power connection links upto 4 ES switches from the redundant master unit. If the power supply fails or Mains supply fails in any one of the 4 connected switches, then the Redundant link cuts in immediately.
| 
Click to Enlarge Image |
 Quick Download : Install Guide
Quick Download : User Manual
Quick Download : ES3628A Data Sheet
Product Features| | - 16K MAC addresses
- Redundant power supply support
- Jumbo frame support (up to 9K)
- 32MB Packet buffering
- Flow control and backpressure
- Store and forward technology
- HOL blocking prevention
- Broadcast storm protection
- IGMP snooping
- Link aggregation, IEEE802.3ad, Cisco Ether-Channel, 32 Trunks with 2 to 8 ports per trunk.
- Spanning tree protocol, IEEE802.1D, 802.1s, 802.1w, proprietary port-based fast-forwarding
- VLAN, IEEE802.3ac Frame extention for VLAN Tagging, 802.1Q, Port Based, GVRP protocol
- Upt to 255 VLAN entries
- IPv4 routing at wire speed
- Up to 4K IP address entries
- Static IP routes (128 entries)
- Multi-netting, Supernetting (CIDR)
- RIP I (RFC 1058) and RIP II (RFC2453)
- OSPF (RFC2328) routing
- IP Multicast routing: IGMP, DVMRP, PIM-DM
- IP redundancy - VRRP (RFC2338) supported
|
|
Product Specification| |
Security
~ RADIUS
~ TACACS+
~ SSL
~ SSH (v1.5 / v2.0)
~ Access control
~ Port-based security
QoS
~ L2/L3/L4 Traffic classification/Priority management
~ WRR for priority queues
~ Rate limiting
~ Priority queue scheduling
~ Random early detection
IEEE Standards
~ IEEE 802.3 10Base-T
~ IEEE 802.3u 100Base-TX and 100Base-FX
~ IEEE 802.3z 1000Base-SX/LS
~ IEEE 802.3x flow control
~ IEEE 802.1D Bridging
~ IEEE 802.1Q Virtual LAN
~ IEEE 802.3ad LACP
~ IEEE 802.1s
~ IEEE 802.1w
Power
~ Input:110 - 240VAC
~ Frequency: 47 - 63Hz
~ Power consumption: 35W
Environment
~ Operating temperature: 0° to 50°C
~ Storage temperature: -40° to 70°C
~ Humidity: 10% to 90% (non-condensing)
Dimensions
~ 440mm x 324mm x 43mm
Compliance
~ CISPR, FCC Class A, CE, VCCI
|
|
Ordering Information
Other Product Resources Product Selector
|