ES4649 48 port Gigabit L3 switch with 4 RJ-45/SFP (paired) ports

The ES4649 is a 48 port Gigabit Ethernet Routing switch. It offers 44 10/100/1000Mbps RJ-45 ports and 4 paired RJ-45/SFP (mini-GBIC) slots with an optional module for 10Gig uplink.. It combines the speed and low cost of a Layer 2 switch with the ability to route at a Layer 3 level and provides comprehensive network management features including: spanning tree protocol, GVRP for VLAN configuration, SNMP, RMON and web management.

The switch offers high performance of gigabit Ethernet at a very attractive price while incorporating industry leading Security features such as ACLs, RADIUS, TACACS+, SSH - Secure Telnet, HTTPS/SSL, and IEEE 802.1x authenticated port security. The 10 Gig optional interface provides the highest level of performance when connecting to a 10 Gigabit Ethernet Backbone.

Increased application performance and better bandwidth utilization can be expected through wirespeed routing with a non-blocking architecture. The Layer 3 routing capability includes RIP I/II, OSPF, IGMP v1/2, DVMRP and PIM-DM and more. All of this helps alleviate unwanted backbone congestion and provides enhanced network security.

The Switch supports enhanced reliability via an optional 19inch Redundant Power Supply unit. This unit can supply redundant power to four ES series Switches from the one unit. A DC power connection links upto 4 ES switches from the redundant master unit. If the power supply fails or Mains supply fails in any one of the 4 connected switches, then the Redundant link cuts in immediately.
 


Click to Enlarge Image
Quick Download : Install Guide

Quick Download : User Manual

Quick Download : ES4625/ES4649 Data Sheet

Product Features

 
  • Optional 10Gigabit uplink or 8 port Gigabit SFP
  • Switch Fabric 80Gbps
  • Redundant power supply
  • L2/L3 wire speed routing performance
  • 16K MAC addresses
  • Flow control/Backpressure with Store and forward switching technology
  • Up to 9K Jumbo Frames
  • HOL blocking prevention
  • Broadcast storm protection
  • IGMP snooping
  • VLAN Supports: IEEE802.3ac frame rate extention for tagging, IEEE802.1Q, Protocol-based VLAN, Private VLAN,GVRP
  • Spanning tree protocol: Rapid reconfiguration spanning tree, Multiple spanning tree
  • Proprietary fast-forwarding mode
  • Link aggregation and LACP
  • Cisco EtherChannel compatible
  • Up to 6 trunk links, Up to 8 ports per trunk group
  • Supports unicast/multicast traffic balance over trunk ports
  • IPv4 routing at wire speed
  • Up to 4K IP address entries
  • Static IP routes (128 entries)
  • Multi-netting, Supernetting (CIDR)
  • RIP I (RFC 1058) and RIP II (RFC2453)
  • OSPF (RFC2328) routing
  • IP Multicast routing: IGMP, DVMRP, PIM-DM
  • IP redundancy - VRRP (RFC2338) supported
  • ARP (RFC826) supported
  • DHCP relay
  • DHCP server/client

Product Specification

 


Security
~ Password protection
~ L2/L3/L4 access control list
~ RADIUS
~ TACACS+
~ SSH
~ HTTPS/SSL
~ IEEE802.1x

QoS
~ 802.1p-based CoS
~ 8 priority queues per port
~ WRR for priority queue
~ Strict scheduling priority queue
~ IP TOS/Preedence-based CoS
~ DSCP-based CoS
~ TCP/UDP
~ Ingress/egress bandwidth management
~ Supports DiffServ

Management
~ RS-232 Console
~ Single Out of Band Ethernet Management port
~ Cisco Like CLI
~ Telnet
~ Web Based Management
~ SNTP
~ SNMPv1, v2c, v3
~ RFC 2819 RMON group 1,2,3 and 9

IEEE Standards
~ IEEE 802.3 10Base-T
~ IEEE 802.3u 100Base-TX and 100Base-FX
~ IEEE 802.3z 1000Base-SX/LS
~ IEEE 802.3x flow control
~ IEEE 802.1D Bridging
~ IEEE 802.1Q Virtual LAN
~ IEEE 802.3ad LACP
~ IEEE 802.1s
~ IEEE 802.1w

Stacking
~ Upt o 8 units
~ Up to 384 ports in stack
~ Auto master selection
~ Auto configuration
~ 40Gbps for stacking bandwidth

Dimensions
~ 440mm x 410mm x 440mm

Ordering Information

 
ES464948 port Gigabit L3 switch with 4 RJ-45/SFP (paired) ports, 1x optional 10G uplink, Redundant PowerWhere to Buy
RPS600WA1RU, 19inch Redundant Power Supply System, supports 4 ES L2/L3/L4 series Switches. (check for supported switches)Where to Buy
EM4625-XGXENPAK10G XENPAK Adapter for use with XENPAK module for ES4625 & ES4649Where to Buy
XENPAK-MSC10G XENPAK Multi Mode Fibre module - 300Metres (Requires EM4625-XGXENPAK)Where to Buy
XENPAK-SC1010G XENPAK Single Mode Fibre module - 10km (Requires EM4625-XGXENPAK)Where to Buy
EM4625-STKCAB-S10G 30cm Stacking cableWhere to Buy
EM4625-STKCAB-L10G 130cm Stacking cableWhere to Buy
EC ViewNetwork devices cab be managed by EC View software programWhere to Buy

Other Product Resources

Product Selector