|
ET-209RST RJ-45 to Fibre Optic (ST) Ethernet Converter.Ethernet Full Duplex Copper to Fibre Media Converter with ST or SC Fibre Connections. Available in both Mulitmode and Singlemode variations.
Alloy offer a complete range of media conversion for Ethernet, Fast Ethernet, Gigabit Ethernet, ATM, and asynchronous Serial Networks over various interface types such as Multimode and Singlemode Fibre Optics, Copper RJ-45 and copper Serial. All Converters are fully compliant with IEEE multiprotocol standards, including 10Base-T/2/FL, 100Base-TX/FX, 1000Base-SX/LX, and ATM protocols.
The Converters ship as standard with a mains plug pack, but can also be directly powered from a PC or Notebook via a PS2 keyboard adapter or a spare USB slot (FE-C120 series only). For centralised media conversion a hot-swappable, 10 slot, 19 inch rackmount chassis can be used to provide a single power source for multiple converters. The Rack chassis solution provides various power options from Dual redundant to single power supplies in either Mains AC voltages or Telco 48V DC options.
Specifically the ET-109/209 range of converters are used for conversion of 10Base-T to Fibre 10Base-FL standards. They are fully compliant with the IEEE 802.3 standards and feature one fibre port using either ST or SC connectors, and one RJ-45 10Base-T port (DTE/MPR switch is used to select either workstation or Hub connection). Distances of up to 2Km are possible on standard Multimode fibre, and upto 10Km with the ET-209RST.S on Singlemode fibre.
Each model has 4 LED indicators for monitoring and diagnosing power, UTP Link/Activity, Fibre Link/Activity and collision.
The ET-109RST/C performs Media conversion and Repeater functions in Half Duplex environments.
The ET-209RST/C performs Media conversion in Half Duplex and Full Duplex Environments.
The E-109/209 media converter can be installed as a standalone unit or as a slide-in module to the 19" converter rack ( CR-1000 ) for use at a central wiring closet.
| 
Click to Enlarge Image |
 Quick Download : Alloy Media Converters Data Sheet
Product Features| | - Complies with appropriate IEEE 802.3 standards
- Individual activity LED indicators for each port allowing easy monitoring and diagnosing functions
- Collision detection, jabber protection, loopback of data and auto-partition
|
|
Product Specification| |
Standard
~ IEEE802.3 10Base-T and 10Base-FL, ST or SC
Data Transfer Rate
~ 10Mbps (ET-109)
~ 10Mbps at Half duplex 20Mbps at Full duplex (ET-209RST/C)
Connectors
~ UTP Ports: RJ-45 Jack
~ Fiber Ports: SC multimode connector (ET-209RSC)
~ Fiber Ports: ST multimode connector (ET-209RST)
Cable
~ UTP: Cat 3/5 UTP cable
~ Fibre: ET-109RST = 50/125, 62.5/125µm or 100/140µm multimode fibre
~ Fibre: ET-209RST.S = 8.3/125, 8.7/125, 9/125 or 10/125µm singlemode fibre
Cable Limitations
~ Fibre: 2km Multimode
~ Fibre: 10km Singlemode
~ UTP: 100m
Five LED indicators
~ (TP Link/ACT, FL Link/ACT, Power, Collision)
Power Requirement
~ +5VDC, 1A
Power Source
~ Plug Pack for stand-alone implementation - 100-240 VAC input, 50-60 Hz.
~ Optional SPC (self powering cable) for powering from keyboard socket (PS/2 & Sun only)
~ 2.5mm rear-mount DC Jack for installation in Alloy CR-1000 Media Converter Chassis
Ambient Temperature
~ ET-109: 0ºC to 50ºC
~ ET-209: 0ºC to 50ºC
Humidity
~ 5% to 90%
Dimensions
~ 26mm(H)x70mm(W)x112mm(D)
Compliance
~ C-Tick, FCC Part 15 Class A & CE Mark
Wavelength
~ ET-109RST, ET-209RST/RSC - 820nm
~ ET-209RST.S - 1300nm
|
|
Ordering Information
|