|
ET-509R BNC to RJ-45 Ethernet ConverterThe ET-509R is an ethernet transceiver, designed to provide cost effective, high performance communication links for connecting UTP and thin ethernet network segments.
It is equipped with two connectors, an RJ-45 UTP connector and a coax (BNC).There are 4 LED indicators on the ET-509 that are used for monitoring and diagnostics. Power, data Transmit, data receive, and collision status Led indication.
The ET-509R is an ideal solution that provides connection from 10Base-T to Thin-Net backbone, where BNC port is not available on the existing 10Base-T concentrator. It provides a plug-and-play solution at very low cost. Supplied with an external AC power adapter.
The ET-509R media converter can be installed as a standalone unit or as a slide-in module to the 19" converter rack ( CR-1000 ) for use at a central wiring closet.
| 
Click to Enlarge Image |
 Quick Download : Alloy Media Converters Data Sheet
Product Features| | - Complies with appropriate IEEE 802.3 standards
- RJ-45 and BNC ports connect easily to existing Network Devices
- Individual activity LED indicators for each port
- Collision detection, jabber protection, loopback of data and auto-partition
|
|
Product Specification| |
Standard
~ IEEE802.3 10Base-T and 10Base-2
Connectors
~ One UTP RJ-45 Jacks: MPR, DTE selectable, One BNC Connector
Data Transfer Rate
~ BNC ACT, POWER, TP LINK/ACT, COLLISION
Power Requirement
~ +5VDC, 1A
Power Source
~ Plug Pack for stand-alone implementation - 100-240 VAC input, 50-60 Hz.
~ Optional SPC (self powering cable) for powering from keyboard socket (PS/2 & Sun only)
~ 2.5mm rear-mount DC Jack for installation in Alloy CR-1000 Media Converter Chassis
Ambient Temperature
~ 0ºC to 50ºC
Humidity
~ 5% to 90%
Dimensions
~ 26mm(H) x 70mm(W) x 112mm (D)
Cable
~ UTP: Cat. 3 UTP cable
~ RG-58 A/U thin cable
~ UTP cable: up to 100m
Cable Limitations
~ Coaxial cable: up to 185m per segment
Compliance
~ C-tick CE Mark
|
|
Ordering Information
|