ATM/Fast Ethernet 155Mbps Multimode to Single Mode Converter. 20Km

ATM/Fast Ethernet Protocol Independent to 155Mbps Multimode to Single Mode Fibre Converter. Available in 20, 40 and 60Km variations. Alloy offer a complete range of media conversion for Ethernet, Fast Ethernet, Gigabit Ethernet, ATM, and asynchronous Serial Networks over various interface types such as Multimode and Singlemode Fibre Optics, Copper RJ-45 and copper Serial. All Converters are fully compliant with IEEE mutlti-protocol standards, including 10Base-T/2/FL, 100Base-TX/FX, 1000Base-SX/LX, and ATM protocols. The Converters ship as standard with a mains plug pack, but can also be directly powered from a PC or Notebook via a PS2 keyboard adapter or a spare USB slot (FE-C120 series only). For centralised media conversion a hot-swappable, 10 slot, 19 inch rackmount chassis can be used to provide a single power source for multiple converters. The Rack chassis solution provides various power options from Dual redundant to single power supplies in either Mains AC voltages or Telco 48V DC options. Specificly the FE-C255SC media converter is designed as a Multimode to Singlemode converter for OC-3 ATM, FDDI , Fast Ethernet and Ethernet. It handles conversion of 1300nm Multimode Fibre to 1310nm Singlemode Fibre transmission. The Multimode Fibre can run up to distances of 2Km, while the Singlemode Fibre can run up to distances of 20Km, but is also available in 40Km and 60Km options upon request. The FE-C255SC media converter can be installed as a standalone unit or as a slide-in module to the 19" converter rack ( CR-1000 ) for use at a central wiring closet.

Click to Enlarge Image

Product Specification

Data Transfer Rate ~ Supports Full-Duplex and Half duplex mode LED Indicators ~ SD for multi/single mode fibre port, POWER Power Requirements ~ +5VDC, 1A Power Source ~ Plug Pack for stand-alone implementation - 100-240 VAC input, 50-60 Hz. ~ Optional SPC (self powering cable) for powering from keyboard socket (PS/2 & Sun only) ~ 2.5mm rear-mount DC Jack for installation in Alloy CR-1000 Media Converter Chassis Ambient Temperature ~ 0ºC to 50ºC Humidity ~ 5% to 90% Dimensions ~ 26.2(H) x 70.3(W) x 94(D) mm Fibre Cable ~ 50/125, 62.5/125, or 100/140um Multimode ~ 8.3/125, 8.7/125, 9/125 or 10/125um Single Mode WaveLength ~ 1310nm

Ordering Information