|
GCR1000SC.3013 1000Base-T to S/Mode 1310nm Gigabit Fibre (SC) Converter. 30KmGigabit 1000Base-T to 1000Base-SX/LX Media Converters. Models available in SC, LC and MT-RJ Termination as well as Multimode and Single Mode variations.
Alloy offer a complete range of media conversion for Ethernet, Fast Ethernet, Gigabit Ethernet, ATM, and asynchronous Serial Networks over various interface types such as Multimode and Single Mode Fibre Optics, Copper RJ-45 and copper Serial. All Converters are fully compliant with IEEE multi-protocol standards, including 10Base-T/2/FL, 100Base-TX/FX, 1000Base-SX/LX, and ATM protocols.
The Converters ship as standard with a mains plug pack, but can also be directly powered from a PC or Notebook via a PS2 keyboard adapter or a spare USB slot (FCR100 series only). For centralised media conversion a hot-swappable, 10 slot, 19 inch rackmount chassis can be used to provide a single power source for multiple converters. The Rack chassis solution provides various power options from Dual redundant to single power supplies in either Mains AC voltages or Telco 48V DC options.
Specifically the GCR1000SC Gigabit Ethernet Converters are specifically designed for conversion from 1000Base-T (1000Mbps only) to 1000Base-X fibre connections. The converters are equiped with SC fibre termination and as standard can be used for distances up to 220m on the 1000Base-X port (50Km on the GCR1000SC.50) and 100m on the 1000Base-T port. Both Half or Full Duplex modes are supported.
The GCR1000SC media converters can be installed as standalone units or as slide-in modules to the 19" converter rack ( CR-1000 ) for use at a central wiring closet.
| 
Click to Enlarge Image
|
 Quick Download : Alloy Media Converters Data Sheet
Product Specification| |
Standards
~ IEEE802.3z/ AB 1000Base-T, 1000Base-SX/LX
UTP Cable
~ Cat. 5 cable
Fibre Cable
~ Fibre Multi-mode 850nm- 50/125, 62.5/125 or 100/140microns up to 220m (GCR1000SC)
~ Fibre Single-mode 1310nm - 8.3/125, 8.7/125, 9/125 or 10/125microns up to 10Km (GCR1000SC.10)
~ Fibre Single-mode 1550nm - 8.3/125, 8.7/125, 9/125 or 10/125microns up to 50Km (GCR1000SC.50)
Wavelength
~ GCR1000SC : MM 850nm
~ GCR1000SC.10: SM 1310nm
~ GCR1000SC.50: SM 1550nm
Data Transfer Rate
~ Supports Full Duplex and Half Duplex modes
LED Indicators
~ PWR, ACT, FX LINK, FX FDX, TP LINK, TP FDX
Wavelength
~ MM: 850nm
~ SM: 1310nm
Power Requirement
~ +5VDC, 1A
Power Source
~ -Plug Pack for stand-alone implementation - 100-240 VAC input, 50-60 Hz.
~ -Optional SPC (self powering cable) for powering from keyboard socket (PS/2 & Sun only)
~ -2.5mm rear-mount DC Jack for installation in Alloy CR-1000 Media Converter Chassis
Ambient Temperature
~ 0° to 50°C
Humidity
~ 5% to 90%
Dimensions
~ 26.2(H) x 70.3(W) x 94(D) mm
|
|
Ordering Information
|