|
10/100/1000Base-T to Gigabit SFP Media Converter with LFP via FEF and FMThe GCR2000xx series of gigabit media converters is IEEE 802.3z/ab compliant and supports 10/100/1000Base-T Gigabit Copper to 1000Base-SX/LX Gigabit Fibre. A SFP based model is also available for use with Gigabit SFP Modules. SFP Modules can be interchanged to add Multimode, Single Mode, WDM and CWDM Connectivity to your media converter.
The GCR2000xx can be used as a standalone unit or as a slide-in module for the DCR12xx 19" converter rack (up to 12 units) for use at a central wiring closet. The GCR2000xx has a USB port that can be used to power the media converter from a USB port on your PC.
The GCR2000 Series converters support two modes of LFP (Link Failure Propagation), the first by a feature called FEF (Far End Fault), this method can only be used in a paired configuration with another device that supports LFP via FEF. The second is a method called forced mode which allows the media converter to support LFP when connected to NON-FEF-AWARE devices such as Fibre Network Switches.
| 
Click to Enlarge Image
|
Product Features| | - 1x 10/100/1000Base-T Gigabit Ethernet UTP port and 1x 1000Base-SX / LX Gigabit Ethernet Fibre port
- Supports 802.3x flow control for full-duplex ports and backpressure for half-duplex ports
- Different fibre distances and connections available, including SC/LC and SFP module slot
- RoHS Compliance
- USB port for Powering the Converter
- LFP via FEF (Far End Fualt) and FM (Forced Mode)
|
|
Product Specification| |
Standards
~ IEEE802.3z/AB 1000Base-T, 1000Base-SX/LX
UTP Cable
~ Cat. 5 cable and above, up to 100m
Fibre Cable
~ SX: 50/125, 62.5/125, or 100/140μm multi-mode
~ LX: 9/125μm single-mode
LED Indicators
~ PWR
~ FX LINK/ACT, TP LINK/ACT, TP SPD
Data Transfer Rate
~ 1000Mbps / 1,488,000 PPS
~ 100Mbps / 148,800 PPS
~ 10Mbps / 14,880 PPS
Power Requirement
~ 1A@+5VDC
Ambient Temperature
~ 0° to 50°C
Humidity
~ 5% to 90%
Dimensions
~ 26.2(H) × 70.3(W) × 94(D) mm
|
|
Ordering Information
|