GE-C300SC Fibre Gigabit Multimode to Single Mode Converter. Multimode 220/550m; Single Mode 5Km

Gigabit Ethernet Multimode to Single Mode Fibre Optic Media Converters. 5 and 30Km Single Mode models available. Alloy offer a complete range of media conversion for Ethernet, Fast Ethernet, Gigabit Ethernet, ATM, and asynchronous Serial Networks over various interface types such as Multimode and Single Mode Fibre Optics, Copper RJ-45 and copper Serial. All Converters are fully compliant with IEEE multi-protocol standards, including 10Base-T/2/FL, 100Base-TX/FX, 1000Base-SX/LX, and ATM protocols. The Converters ship as standard with a mains plug pack, but can also be directly powered from a PC or Notebook via a PS2 keyboard adapter or a spare USB slot (FE-C120 series only). For centralised media conversion a hot-swappable, 10 slot, 19 inch rackmount chassis can be used to provide a single power source for multiple converters. The Rack chassis solution provides various power options from Dual redundant to single power supplies in either Mains AC voltages or Telco 48V DC options. Specifically the GE-C300 Gigabit Fibre Optic Converter is specifically designed for conversion from long wave 1000Base-LX to short wave 1000Base-SX fibre Connections. The converters are equiped with SC fibre termination and as standard can be used for distances upto 500m on the 1000Base-SX port and 30Km on the 1000Base-LX port. The GE-C300 media converter can be installed as a standalone unit or as a slide-in module to the 19" converter rack ( CR-1000 ) for use at a central wiring closet.

Click to Enlarge Image

Product Specification

Standards ~ IEEE 802.3z - Gigabit Ethernet 1000Base-SX/LX Fibre Cable ~ Recommended: 62.5/125um multi-mode ~ Optional: 50/125um multi-mode up to 500M ~ Recommended: 9/125um single-mode Data Transfer Rate ~ Supports Full Duplex and Half Duplex modes Fibre Range ~ MultiMode = 220m on 62.5/125um, 500m on 50/125um ~ SingleMode = 30km LED Indicators ~ SD for multi/single mode fibre port, POWER Wavelength ~ MM: 850nm ~ SM: 1310nm Power Requirement ~ +5VDC, 1A Power Source ~ -Plug Pack for stand-alone implementation - 100-240 VAC input, 50-60 Hz. ~ -Optional SPC (self powering cable) for powering from keyboard socket (PS/2 & Sun only) ~ -2.5mm rear-mount DC Jack for installation in Alloy CR-1000 Media Converter Chassis Ambient Temperature ~ 0°C to 50°C Humidity ~ 5% to 90% Dimensions ~ 26,2(H) x 70.3(W) x 94(D) mm

Ordering Information