|
GEM6400LC Series Gigabit Fibre Optic Nics64-bit PCI 1000Base-SX Fibre High performance Network Adapter supporting a LC Duplex interface 850nm. 220m (62.5/125) or 550m (50/125)
The GEM6400 is PCI 2.2 standards compliant, operates in 32-bit and 64-bit PCI host systems, and supports 33/66Mhz PCI buses at both 5 and 3.3Volts.
The Marvell based controller offers many advanced network features. Host CPU offload support (including TCP/UDP checksum offload), intelligent Interrupt Optimisation, and 9K Jumbo Frame Ethernet packets for maximised network efficiency. These cards can operate in any PCI format including PCI-X.
| 
Click to Enlarge Image |
 Quick Download : GEM6400 family data sheet
Product Features| | - Multimode and Singlemode versions available
- Low Profile PCB
- Full-Duplex Mode with IEEE 802.3x Flow Control
- Compliant with PCI 2.2 Interface
- Jumbo Frame up to 9014 Bytes
- On-board verification of IP headers and TCP / UDP checksums for received data
- 64 Bit, 66MHZ PCI/PCI-X
- PXE Boot Support
- 1000Base SX, 1000Base LX
- Wide Range OS Support
- SC and LC models available
|
|
Product Specification| |
Connector:
~ 850nm SC or LC multimode
~ 1310nm SC or LC singlemode
~ 1550nm SC or LC singlemode (on Request)
Fibre Optic Cable:
~ 62.5/125, 50/125µm multimode
~ 9/125µm singlemode
Data Transfer Mode/Speed:
~ Full duplex with Nway flow control
~ 1000Mbps speed
LEDs:
~ LINK/ACT and FDX LEDs on the bracket
Bus Slot:
~ 64/32bit PCI 2.2 Compliant
Power Requirement:
~ 10W @ 5VDC
Standards:
~ IEEE802.3z Gigabit Ethernet 1000Base-SX/LX
|
|
Ordering Information
Other Product Resources Marvel 88E8010 driver Search
|