|
10/100Base-TX to 100Base-FX Multimode Fibre (ST) Converter module. 2KmThe MFCR range of media converter modules are designed to convert 10/100Base-TX copper to 100Base-FX fibre.
The media converter is designed to be housed inside the MCR12 range of Managed media converter chassis's. With a built in SNMP agent, web based management and CLI the adminstrator can configure and monitor up to 12 media converter modules from a single location.
With OAM functionality monitoring, remote failure indication and loopback testing can be performed to the remote devices connected to these media converters via the TS-1000 mechanism. This allows the administrator to have complete control of both the local media converters and also the devices that are connected at the remote end points. (Please note the remote device must also support OAM.)
| 
Click to Enlarge Image
|
Product Features| | - 10/100Base-TX to 100Base-FX Multimode Fibre (ST) Converter module. 2Km
- Hot Swappable
- Supports auto MDI-X and auto negotiation
- Supports Full and Half Duplex
- Supports LFP (Link Fault Propagation)
- Allows Remote Configuration and Monitoring via TS-1000
- Fibre Loopback testing capabilities
- RoHS Compliant
|
|
Product Specification| |
Standards
~ IEEE 802.3 10Base-T
~ IEEE 802.3u 100Base-TX
~ IEEE 802.3x Full Duplex, Flow Control
10Base-T/100Base-TX
~ Connectors: RJ-45
~ Auto Negotiation
~ Auto-MDIX
~ Transmission: Full/Half Duplex
~ Max. Cable Length: up to 100m
100Base-FX (Multimode)
~ Connectors: SC/ST
~ Transmission: Full/Half Duplex
~ Max. Cable Length: 2Km for 62.5/125micron
~ Wavelength: 1310nm
100Base-FX (Single Mode)
~ Connectors: SC/Bidi
~ Transmission: Full/Half Duplex
~ Max. Cable Length: 60Km for 9/125micron
~ Wavelength: 1310nm or 1550nm
Power Requirement
~ 0.5A@+3.3VDC
Consumption
~ 1.65W
Temperature
~ 0 to 40 C
Humidity
~ 5% to 90%
Dimensions
~ 83(L) x 60(W)mm
|
|
Ordering Information
|