|
1000Base-T to Gigabit Fibre Multimode (SC) Converter module. 220/550mThe MGCR range of media converter modules are designed to convert 1000Base-T copper to 1000Base-SX/LX/LH/ZX fibre.
The media converter is designed to be housed inside the MCR12 range of Managed media converter chassis's. With a built in SNMP agent, web based management and CLI the adminstrator can configure and monitor up to 12 media converter modules from a single location.
With OAM functionality monitoring, remote failure indication and loopback testing can be performed to the remote devices connected to these media converters via the TS-1000 mechanism. This allows the administrator to have complete control of both the local media converters and also the devices that are connected at the remote end points. (Please note the remote device must also support OAM.)
| 
Click to Enlarge Image
|
Product Features| | - Hot Swappable
- Supports auto MDI-X and auto negotiation
- Supports Full and Half Duplex
- Supports LFP (Link Fault Propagation)
- Allows Remote Configuration and Monitoring via TS-1000
- Fibre Loopback testing capabilities
- Supports Q-in-Q double tagged frame
- Jumbo Frame and low latency data transfer
- RoHS Compliant
|
|
Product Specification| |
Standards
~ IEEE 802.3ab 1000Base-T
~ IEEE 802.3z 1000Base-X
~ IEEE 802.3x Full Duplex, Flow Control
1000Base-T
~ Connectors: RJ-45
~ Auto Negotiation
~ Auto-MDIX
~ Transmission: Full Duplex Only
~ Max. Cable Length: up to 100m
1000Base-SX (Multimode)
~ Connectors: SC/LC
~ Transmission: Full Duplex Only
~ Max. Cable Length: 220m for 62.5/125micron and 550m for 50/125micron
~ Wavelength: 850nm
1000Base-LX (Single Mode)
~ Connectors: SC/Bidi SC/LC
~ Transmission: Full Duplex Only
~ Max. Cable Length: 50Km for 9/125micron
~ Wavelength: 1310nm or 1550nm
Power Requirement
~ 0.6A@+3.3VDC
Consumption
~ 1.98W
Temperature
~ 0 to 40 C
Humidity
~ 5% to 90%
Dimensions
~ 83(L) x 60(W)mm
|
|
Ordering Information
|