|
Rackmount Gigabit Ethernet Tap with 2x network and 2x monitoring portsXtramus NuTAP-L series is the only high-level Ethernet TAP product with the ability to support port aggreagation.
The NuTAP-L series of Ethernet TAP's is the first of it's kind supporting a beneficial rack mount deisgn allowing easy integration to your existing network rack and additionaly allowing easy connection to your existing network infrastructure. It's unique Gigabit design is also market leading and allows full wirespeed transmission as well as capturing all network traffic being monitored. The NuTAP-L series comes with two models supporting 2 or 4 UTP network interfaces.
NuTAP-L12G supports aggregation mode and segregation mode, allowing redirection of the target packets. Up to 60 sets of event counters on each surveillance line can provide important data for network statistics, error detecting, analysis, monitoring and so on.
Major Benefits
- Real-time monitoring and analyzing of network traffic.
- Relay function allows network connectivity if power fails.
- Provides an invisible, non-intrusive permanent access to network monitoring and analysis devices without link disruption or degradation.
- Simultaneous non-blocking forwarding of all TX and RX traffic, including error packets.
- Protects the IDS sensor from attack by the monitored segment.
- Option to withdraw mirroring function to avoid any problems associated with such methods.
- Easy to read counter status.
- Conforms to 19¨ rackmount form factor.
| 
Click to Enlarge Image
|
Product Features| | - Active TAP based on monitor and forward architecture
- Real-time LED display of traffic events and monitoring
- Packet redirect function:
- Aggregation mode: Up/Down redirect into one
- 1 pair (2 ports) to 2 output port (L12G)
- 2 pairs (4 ports) to 1 output port (L21G)
- Segregation mode: Up/Down redirect separates individual traffic from 1 pair to individual output port (L12G)
- Swap aggregation / Segregation mode: Controlled by on-panel button, serial port, or web-based management interface
- Error Traffic Redirect
- User friendly design of web-based management interface
- Provides multiple Statistic Counters: Rx Frame, Tx Frame, Collision, CRC Error, Alignment Error, Dribble Error, Oversize, Undersize, Broadcast, Multicast, Packet size (64~1518), Pause, 256 streams VLAN, Frame Rate and other RMON counters
- Redundant power (DC 48V power input module) optional
- Supports PoE pass through
- Supports Loopback test function
|
|
Product Specification| |
Network Port:
~ NuTAP-L12G: One pair of 10/100/1000Mbps RJ-45 port for traffic up to 1 network segment
~ NuTAP-L21G: Two pairs of 10/100/1000Mbps RJ-45 ports for traffic up to 2 network segments
Monitoring Port:
~ NuTAP-L12G: Two 10/100/1000Mbps RJ-45 ports
~ NuTAP-L21G: One 10/100/1000Mbps RJ-45 port
Management Port:
~ One 10/100Mbps RJ45 port
Serial Port:
~ One RS-232 port for real-time display of traffic statistics
Supported Packet Length:
~ 32~16000 bytes
Power Source Type:
~ AC 90V~240V( Standard) DC 48V(optional)
Power Consumption:
~ 7.5~ 13 Watts
Test Criteria:
~ Unicast, Broadcast, Pause Control, Collision, CRC, Undersize, Oversize, Trigger, Capture Loss
Temperature:
~ Operating: 0 C ~ 40 C
~ Storage: 0 C ~ 50 C
Humidity:
~ Operating: 0% ~ 85% RH
~ Storage: 0% ~ 85% RH
Dimensions:
~ 442 mm x 240 mm x 43 mm
|
|
Ordering Information
| | | NUTAP-L12G | Rackmount Gigabit Ethernet Tap with 2x network and 2x monitoring ports | Where to Buy |
| NUTAP-L21G | Rackmount Gigabit Ethernet Tap with 4x network and 1x monitoring port | Where to Buy |
|
|