|
10/100Base-TX to 100Base-FX WDM Fibre PoE Converter, SC, 40KmsThe POE100S5.40 Media Converter provides 10/100Base-TX to 100Base-FX WDM fibre conversion with additional support for POE power output on its RJ-45 copper interface for powering of devices such as IP Phones and Wireless Access Points. The device provides connectivity over a single core of singlemode optical fibre. WDM Media Converters must be used in paired POE100S3xx and POE100S5xx combinations. Link Failure Propogation (LFP) is supported via Far End Fault mode.
Alloy PoE 100 and 200 series Media Converters are used to inter-connect UTP copper and fibre optic network types, while additionally providing the ability to supply power to appropriate endpoint devices via UTP cable.
All models are fully compliant to the IEEE802.3af Power Over Ethernet standard. These AC powered PoE Media Converters are Power Sourcing Equipment (PSE) devices, which combine data received over a fibre optic link with 48VDC power, providing power to IEEE802.3af powered devices (PD devices; for example Alloy POE120 series converters, IP Phones, Wireless Access Points etc.) over existing CAT5 UTP cable. All models include signature sensing and power monitoring features compliant with the IEEE 802.3af standard, This includes, PD discovery, classification, current limiting and other necessary functions. It also supports high levels of safety support with short circuit protection and power-out auto-detection to the PD.
Individual models support multimode, singlemode, or singlemode/singlecore WDM fibre connectivity, with fibre cable ranges from 2 to 80 kilometres.
POE100 and POE200 series Converters support LFP (Link Failure Propagation), allowing network administrators to easily diagnose link faults on their network. If the Copper or Fibre link fails, the Converter forces the link status of the connecting device to also fail. Both models supports 'Far End Fault' LFP operation mode; POE200 Series models also support 'Forced Mode' LFP operation.
| 
Click to Enlarge Image
|
 Quick Download : POE Media Converter Data Sheet - POE100, 200 & 120 series
Product Features| | - POE100 series Converters support Link Failure Propogation via Far End Fault (FEF)
- POE200 series Converters support a more advanced Link Failure Propogation via Force Link modes and Far End Fault modes (FEF)
|
|
Product Specification| |
Standards
~ IEEE 802.3u 10/100Base-TX, 100Base-FX
~ IEEE 802.3af Power Over Ethernet
UTP Cable
~ Cat. 5 cable up to 100m
Fibre Cable
~ 50/125, 62.5/125 or 100/140 µm multi mode
~ 8.3/125, 8.7/125, 9/125 or 10/125 µm single mode
Power Feeding Support
~ Via TP Pins 1, 2, 3 and 6
Link Fault Propogation (LFP)
~ 200 Series: Dual Mode Far End Fault (FEF) and Forced Link (FL)
~ 100 Series: Dual Mode Far End Fault (FEF) only
LED Indicators
~ Power, POE, TP LNK/ACT, 100, FX LNK/ACT, FDX/COL, 4W, 7W, 15.4W
Data Transfer Rate
~ 100Mbbps – 148,800pps
~ 10Mbps – 14,880pps
Flow Control
~ IEEE 802.3x compliant for Full Duplex
~ Backpressure flow control for Half Duplex
Power Requirements
~ AC 100 ~ 240V 50 ~ 60Hz
Power Consumption
~ 24W
~ 0º to 50º C
Ambient Temperature
Humidity
~ 5% to 90%
Dimensions
~ 40(H) x 158(W) x 133(D) mm
Certifications
~ Complies with C-Tick, FCC Part 15 Class A and CE Mark
|
|
Ordering Information
| | | POE100S5.40 | 10/100Base-TX to 100Base-FX WDM Fibre PoE Converter, SC, 40Kms | Where to Buy |
| POE100LC | 10/100Base-TX to 100Base-FX Multimode Fibre PoE Converter, LC Connector | Where to Buy |
| POE100S3.20 | 10/100Base-TX to 100Base-FX WDM Fibre PoE Converter, SC, 20Kms | Where to Buy |
| POE100S3.40 | 10/100Base-TX to 100Base-FX WDM Fibre PoE Converter, SC, 40Kms | Where to Buy |
| POE100S3.60 | 10/100Base-TX to 100Base-FX WDM Fibre PoE Converter, SC, 60Kms | Where to Buy |
| POE100S5.20 | 10/100Base-TX to 100Base-FX WDM Fibre PoE Converter, SC, 20Kms | Where to Buy |
| POE100S5.60 | 10/100Base-TX to 100Base-FX WDM Fibre PoE Converter, SC, 60Kms | Where to Buy |
| POE100SC | 10/100Base-TX to 100Base-FX Multimode Fibre (SC) Converter, provides POE power (RJ-45). 2km | Where to Buy |
| POE100SC.100 | 10/100Base-TX to 100Base-FX Singlemode Fibre PoE Converter, SC, 100Kms | Where to Buy |
| POE100SC.20 | 10/100Base-TX to 100Base-FX Singlemode Fibre PoE Converter, SC, 20Kms | Where to Buy |
| POE100SC.40 | 10/100Base-TX to 100Base-FX Singlemode Fibre PoE Converter, SC, 40Kms | Where to Buy |
| POE100SC.60 | 10/100Base-TX to 100Base-FX Singlemode Fibre PoE Converter, SC, 60Kms | Where to Buy |
| POE100SC.80 | 10/100Base-TX to 100Base-FX Singlemode Fibre PoE Converter, SC, 80Kms | Where to Buy |
| POE100ST | 10/100Base-TX to 100Base-FX Multimode Fibre (ST) Converter, provides POE power (RJ-45). 2km | Where to Buy |
| POE200LC | 10/100Base-TX to 100Base-FX Multimode Fibre PoE Converter, LC Connector | Where to Buy |
| POE200SC | 10/100Base-TX to 100Base-FX Multimode Fibre (SC) Converter, provides POE power (RJ-45). 2km | Where to Buy |
| POE200ST | 10/100Base-TX to 100Base-FX Multimode Fibre (ST) Converter, provides POE power (RJ-45). 2km | Where to Buy |
|
|