|
Discontinued Product.100Base-TX to 100Base-FX Single Mode Fibre (SC) PoE Converter10/100Base-TX to 100Base-FX Multimode Fibre Converter. Media Converter can be powered via RJ-45 port via POE power-sourcing device, such as the Alloy POE100SC.
The POE120xx is a 10/100Base-TX to 100Base-FX media converter, for connecting two types of network segments easily and inexpensively. Utilising the IEEE802.3af Power Over Ethernet standard, power for this media converter is supplied through the RJ-45 port by a POE power-sourcing device, such as the Alloy POE100SC.
With LFP (Link Fault Propagation) support it allows the administrator to easily diagnose link faults on their network. If the Copper or Fibre link fails, the converter forces the link status of the connecting device to also fail. The POE120 Series media converters are fully compliant to the IEEE 802.3af standard. The converters advanced auto-sensing algorithm allows the unit to draw power from any IEEE 802.3af Power Sourcing Equipment (PSE) device (POE100 Series Converter, or PoE Switch or Power over Ethernet Injector). It also supports high levels of safety support with short circuit protection and power-in auto-detection. The POE120 series converters can be powered from either a standard plug pack or a PSE device.
| 
Click to Enlarge Image
|
 Quick Download : POE Media Converter Data Sheet - POE120, 100 & 200 series
Product Specification| |
Standards
~ IEEE 802.3u 10/100Base-TX, 100Base-FX
~ IEEE 802.3af Power Over Ethernet
UTP Cable
~ Cat. 5 cable up to 100m
Fibre Cable
~ 50/125, 62.5/125 or 100/140 µm multi mode
~ 8.3/125, 8.7/125, 9/125 or 10/125 µm single mode
Power Reception Support
~ “Endpoint” Via TP Pins 1, 2, 3 and 6
~ ”Midspan” Via TP pins 4, 5, 7 and 8
LED Indicators
~ Power, POE, TP LNK/ACT, 100, FX LNK/ACT, FDX/COL
Data Transfer Rate
~ 100Mbbps – 148,800pps
~ 10Mbps – 14,880pps
Flow Control
~ IEEE 802.3x compliant for Full Duplex
~ Backpressure flow control for Half Duplex
Power Requirements
~ 60mA@-48VDC from IEEE 802.3af PSE or POE Injector
Ambient Temperature
~ 0ºC to 50ºC
Humidity
~ 5% to 90%
Dimensions
~ 26.2(H) x 70.3(W) x 94(D) mm
Certifications
~ Complies with C-Tick, FCC Part 15 Class A and CE Mark
|
|
Ordering Information
| | | POE120SC.60 | 10/100Base-TX to 100Base-FX Single Mode Fibre (SC) Converter, powered from POE device. 60Km | Where to Buy |
| POE120SC | 10/100Base-TX to 100Base-FX Multimode Fibre (SC) Converter, powered from POE device. 2km | Where to Buy |
| POE120SC.1320 | 10/100Base-TX to 100Base-FX Single Mode Fibre 1310nm (SC) Converter, powered from POE device. 20Km | Where to Buy |
| POE120SC.1520 | 10/100Base-TX to 100Base-FX Single Mode Fibre 1550nm (SC) Converter, powered from POE device. 20Km | Where to Buy |
| POE120SC.20 | 10/100Base-TX to 100Base-FX Single Mode Fibre (SC) Converter, powered from POE device. 20Km | Where to Buy |
| POE120SC.40 | 10/100Base-TX to 100Base-FX Single Mode Fibre (SC) Converter, powered from POE device. 40Km | Where to Buy |
| POE120ST | 10/100Base-TX to 100Base-FX Multimode Fibre (ST) Converter, powered from POE device. 2km | Where to Buy |
|
|