|
Single Mode/Single Fibre (SC) 1310nm SNMP Converter with LFP. 20KmFast Ethernet 10/100Base-TX to 100Base-FX Fibre Optic Managed Media Converter. Models available in ST and SC Termination as well as Multimode, Single Mode and WDM variations upto 60Km.
The RC-2002Bxx series of Managed Media Converters is designed to convert from 10/100Base-TX to 100Base-FX Fast Ethernet. The RC-2002Bxx family support a wide range of model options including MultiMode, Singlemode and WDM (Wave Division Multiplexing). WDM enables network connectivity over a single core of SingleMode fibre, rather than the usual separate send and receive paired cores.
The Converters support various remote monitoring and maintenance features including: Web based (HTTP) management, Telnet management for CLI applications and Local RS-232 Console connectivity. An integrated SNMP Agent can also provide mission critical alert information via SNMP Traps, any standard SMTP email server, or via SMS notification services. Trap events can be customised to suit your particular applications needs.
For applications like FTTH/FTTX (Fibre to The Home and Fibre To Anywhere), the RC-2002Bxx can be used to manage data throughput levels with the device's "Rate Control" function - This allows allocation of bandwidth based on 1Mbps increments. Rate control enables delivery of guaranteed Customer Service Levels down to the CPE (Customer Premises Equipment) end point.
The RC-2002Bxx series supports cables ranges up to 60 kilometres. All models share a rich feature set, including case intrusion, power voltage and temperature detection, external loop-back capability, broadcast storm filtering, detection of single fibre disconnection, user login management, TFTP on-line upgrade, and many other features.
Note: WDM models must be used as a pair, ie. RC-2002BS5.S20 must be used with RC-2002BS3.S20 (or equivalent WDM device)
| 
Click to Enlarge Image
|
Product Features| | - Port Status, Counter and Configuration
- System configuration includes administrator, guest users and IP address relative to parameters and SNMP basic parameters
- Maximum packet length can be up to 1916 bytes
- Bandwidth rating management with a resolution of 1% (up to 25%) of designated speed
- Broadcast suppression to avoid power loss and recovery when several devices register to a NMS simultaneously
- The trap events alarm can be sent via e-mail and mobile phone short message
- Includes Case Intrusion Detection
- Configured settings can be saved into the on-board flash memory, and the current settings can be recovered from the default settings or from the previous configured settings
- On-board diagnostic functions allow the administrator to know the status of the hardware
- On-board firmware can be updated via TFTP function
- The converter allows administrators to reboot the system from the management station
- Dying Gasp function allows an OAM packet to be sent if a power failure occurs
|
|
Product Specification| |
Ports
~ One 10/100M RJ-45 UTP port, One 100M MM or SM fibre port.
Console Port
~ Serial console port
Dimensions
~ 140.7L x 90Wx 30.6H mm
Input Power
~ 5V +/- 5%, 2A from external power adapter
Power Consumption
~ 4.5 Watts maximum
Flash
~ 2M bytes
CPU Main Memory
~ 16M bytes
MAC Address and Self-learning
~ 1K
Packet Buffer Memory
~ Up to 64KB
Flow Control
~ Backpressure for half duplex, IEEE802.3x for full duplex
LED Display
~ TP Port : Link/Activity, Speed(10/100Mbps), FDX/COL
~ Fibre Port : Link/Activity
~ Device : Power, CPU/LOOP
Management
~ In-Band : Web-Based, SNMP, Telnet
~ Out-Band : Serial Console
SNMP Management Agent
~ MIB II(RFC 1213),Private MIB
Software Upgrade
~ TFTP
Environmental Temperature
~ Operating: 0 ~ 50°C
~ Storage: -20 ~ 70°C
Humidity
~ 5% ~ 95%
|
|
Ordering Information
|