|
RUS-9510A Industrial RS-422/485 Rail RepeaterThe RUS-9510 repeater boosts the RS-422/485 signal to extend the distance up to 4000 ft (1200m) and increase the maximum number of connected nodes to 128.
With a special circuitry, the RUS-9510 is able to automatically detect the data flow and switch the direction of the data lines accordingly.
“Auto baud rate detector” enables the RUS-9510 to automatically configure RS-422/485 signals to any baud rate without external switch settings.
Built in Opto-isolations on the RUS-9510 provides 3000VDC of isolation to protect the host computer from ground loops
and destructive voltage spikes on the RS-422/485 data lines.
The RUS-9510 also offers internal surge-protection on the data lines. Internal high-speed transient suppressors on each data line protect the module from dangerous voltages levels or spikes.
| 
Click to Enlarge Image
|
 Quick Download : RUS-9510A Datasheet
Quick Download : Power Supply Reference Chart
Product Features| | - Automatic internal RS-422/485 bus supervision
- No external flow control signals required for RS-485
- Minimum 3000VDC isolation protection
- Transient suppression on RS-485 data lines
- Supported baud rate up to 115.2Kbps
- Reach distance up to 4000 feet (1200m)
- Reserved space for termination resistors (R8,R9)
- Power and data flow indicator for troubleshooting
- Power requirement: +10V to +30VDC
- Mounts easily on DIN-rail or panel
|
|
Product Specification| |
Input
~ RS-422/485
Output
~ RS-422/485
Isolation Protection
~ 3000V
Supported Baud Rate
~ 1200, 2400, 4800, 9600, 19.2K, 38.4K, 57.6K, 115.2K
RS-422 Signals
~ Tx+, Tx-, Rx+, Rx-
RS-485 Signals
~ Data+, Data-
Plug-in screw terminal wiring
~ Accepts AWG 1-#12 to #22 (0.5 to 2.5mm) wires
Power Requirements
~ Unregulated +10 to +30VDC with reverse polarity protection
Power consumption
~ 0.7W
Case
~ ABS with captive mounting hardware
Accessories
~ NYLON DIN-rail Mounting Adapter SECC Panel Mounting Bracket
Dimensions
~ 7 x 10 x 2 cm
Weight
~ 0.4 kg
Operation Temp
~ -25 to 75 deg C
Storage Temp
~ -40 to 80 deg C
Humidity
~ 5~95%, non-condensing
Regulatory Approval
~ RoHS & WEEE Compliant
~ CE
~ FCC
~ C-Tick
|
|
Ordering Information
|