|
SK-9E91 PCI Express 1000Base-LX (LC) Adapter (1X PCI-E)SysKonnect's SK-9Exx Server adapter product line offers a unique combination of high performance and superior fault tolerance for Servers requiring both gigabit level throughput and failsafe network connectivity. These adapters feature a true 64-bit wide data path, parity checking and generation, on-board checksumming and Dynamic Interrupt Moderation. Server adapters that deliver Gigabit Ethernet performance, coupled with the reliability and data integrity you need for your critical Servers.
SK-9Exx Server Adapters are built around an advanced technology. Supporting the new PCI-Express standard, the full-duplex SK-9Exx Server Adapters will not be the bottleneck in your Server bus. In addition, both single port and Dual Link adapters allow 64-bit addressing in a single cycle to address more than 4 GB of RAM - almost a necessity for many of today's high-end Server applications.
Dual Homing with a single SysKonnect adapter provides the ultimate in reliable Server connectivity while protecting your Server investment.
| 
Click to Enlarge Image
|
 Quick Download : SK-9E81 Data Sheet
Quick Download : SK-9E82 Data Sheet
Quick Download : SK-9E91 Data Sheet
Quick Download : SK-9E92 Data Sheet
Product Features| | - Unique two-port, "Dual Link" adapter provides redundant Gigabit Ethernet links in a single PCI slot for crucial Server applications that must have guaranteed connectivity
- RLMT (Redundant Link Management) manages unattended and automatic failure recovery of downed links
- Optimized Data Integrity: Parity checking and parity generation of onboard data paths
- On-board temperature and voltage sensors
- PCI Hot Plug Compatibility - supports state of the art real-time service (OS dependent)
- Full Duplex Gigabit Ethernet: Single link and Dual Link Adapters
- Hardware based TCP, UDP and IP checksum calculation
- Full 64-bit wide data paths throughout
- Dynamic Interrupt Moderation via SysKonnect's PacedPacketBatch technology - minimizes the number of interrupts and improves performance at high packet rates
- 64-bit single cycle addressing, and 32-bit dual cycle addressing for more than 4GB of RAM
- LED indicators for data, link status and active port (on Dual Link Adapter)
- SNMP manageable
- PCI-Express 1.0a compliant
|
|
Product Specification| |
Driver Support
~ Windows: NT4, 98 SE, ME, 2000, XP Professional and Home, Small Business Server 2003, Server 2003, Server 2003 x64, Server 2003 for 64Bit Itanium
~ Linux: Kernel 2.4.13 and higher
~ Drivers for other operating systems – please check website www.syskonnect.com
Boot Option
~ Standard PXE 2.1 (Pre-Boot eXecution Environment)
~ RPL (Remote Program Load)
Standard Compliances
~ IEEE 802.3x with flow control / auto-negotiation
~ IEEE 802.1p class of services
~ IEEE 802.1q/IEEE 802.3ac VLAN Tagging
~ IEEE 802.3ac frame extension for VLAN Tagging
~ IEEE 802.3ad link aggregation
~ IEEE 802.3z
Bus Interface
~ PCI-Express 1.0a compliant
~ x1 PCI-Express Serial Link (adapter can also be operated in x4, x8 and x16 slots)
~ PCI-Express Native Hot Plug according to PCI-Express 1.0a and Advanced Configuration
Network Connector
~ 1000Base-SX LC connector
~ 1000Base-LX LC connector
EMC
~ CE, FCC Class B, VCCI
Safety Standards
~ CSA, CB, CE, UL
Notes
~ Parity monitoring on all data path
~ 96 KB ultra deep memory for each port
~ Sensor support for voltage and temperature
~ TCP, UDP and IP checksum offload
~ TCP Segmentation (Large Send)
~ Jumbo Frame support
~ System Management Bus Interface for ASF/ IPMI with integrated on chip controller
~ Dynamic Interrupt Moderation
~ Promiscuous Mode
~ Multicast support
~ Advanced Power Management (ACPI 2.0)
~ PCI Low Profile with included bracket
~ SNMP MIB Statistic Specification
Warranty
~ 5 years
|
|
Ordering Information
|