X1000-II Single Port BRI ISDN Router with 5 connection VPN/IPSec Licence

The X1000 II from Bintec is based on the X1000. It provides all features of X1000. In addition, X1000 II supports all features of release 7.1.2 enabled by high performance CPU and more memory. The X1000 II from Bintec is a fully featured and flexible ISDN multiprotocol router. It has been specially developed for remote access to small businesses, remote offices or home offices. All branch workers can access the Internet as well as remote corporate networks. Fax and network services such as e-mail, home banking or file transfer are also supported. Teleworkers on the road can dial into their office via ISDN or mobile phone. They can work as if they are actually in the office. The X1000 II integrates branch offices into the corporate network and retains the workflow of fax and e-mail services. Remote access provides the opportunity to make the right information available at the right time. Remote access, however, involves an element of risk: information can be accessed or manipulated by unauthorized personnel. In order to prevent this abuse, extensive firewall mechanisms have been implemented in the X1000 II, as well as remote access via an Internet Virtual Private Network. The X1000 II meets the high security requirements of remote offices. Thus, these offices are integrated into the security policy of the entire organisation. The X1000 II is much more than just a router. Besides security, Bintec places special emphasis on the management of cost and administration. Intuitive, high quality tools simplify configuration and enable remote administration.

Click to Enlarge Image

Product Specification

TCP/IP routing ~ Routing information updating and distribution, static or dynamic (RIP v1/v2/triggered, RFC 2091), selectable for each interface, ProxyARP, BOOTP/DHCP forwarding OSPF ~ Static/dynamic updating and distribution of routing information Bridging ~ Spanning Tree & Transparent Mode QoS ~ Quality of Service with DiffServ and shaping: breakdown of IP data traffic into classes with different priorities, optimized queue handling and shaping as per these priorities BRRP ~ Bintec Router Redundancy Protocol, back up a service offered by a single physical router to a LAN (Virtual Router) IP load balancing ~ Bandwidth management BoD ~ Bandwidth on Demand: Scalable bandwidth to suit data traffic load AUX backup ~ Backup via GSM, GPRS or analogue modem PPP ~ Authentication mechanisms (PAP, CHAP, MS-CHAP, MS-CHAP v2), standard PPP, channel bundling over Multilink PPP (ML-PPP), transparent mode, dynamic IP address assignment (server and client mode) PPPoE ~ Point-to-Point Protocol over Ethernet (Client and Server) for high-speed Internet access over xDSL (RFC 2516) LAN user - ISDN WAN partner ~ Unlimited number Dynamic IP addresses ~ Simple Internet access without fixed IP addresses XoT ~ X.25 over IP ISDN accounting ~ Call detail recording, number, charging information Event Scheduler ~ Budgets based on data volume or based on time Short hold ~ Static and dynamic short hold saves connection costs through automatic call clearing Keep Alive Monitoring ~ Saves costs by only allowing a connection to be set up if configurable IP addresses can be reached VJHC ~ Van Jacobsen Header Compression MPPC ~ Software data compression also in combination with MPPE (Microsoft Point to Point Encryption), free-of-charge licence necessary STAC ~ Compression for PPP connections, free-of-charge licence necessary Cost of ownership ~ Minimum, e.g. due to free software updates, full remote administration Processor / memory ~ Motorola RISC Processor, 4 MB Flash, 16 MB RAM LAN ~ Auto sensing 10/100 Mbps Ethernet twisted pair ISDN ~ 1 x BRI, 2 B-channels Console ~ Serial console port: RS 232 C, 8-pole Mini-DIN, 1,200 bps - 115 kbps Power supply ~ External power supply 5 V DC Status LEDs ~ Power, LAN, ISDN-B1, ISDN-B2, Error Node/hub support ~ Via cable supplied as standard Dimensions ~ Approx. 141 x 50 x 145 mm (W x H x D) Weight ~ Approx. 330 g ISDN protocols ~ Euro-ISDN and other national ISDN protocols Dialup and leased lines ~ Optional: Leased lines supported: D64S, D64S2, TS02, D64S2Y B-channel protocols ~ Excellent interoperability with other manufacturers (Raw HDLC, CISCO HDLC, X.75) X.25 / X.31 ~ X.25 within ISDN B- and D-channel AODI ~ Always On Dynamic ISDN available Multi-CAPI ~ CAPI 2.0 with CAPI user concept (password requested for CAPI use) permit direct access to services such as fax and e-mail Bit rate adaptation ~ V.110 (1,200 up to 38,400 bps), V.120 up to 57,600 kbps (HSCSD) for connection to GSM subscribers NAT/PAT ~ Network & Port Address Translation / Stateful Packet Inspection: Isolation of complete network from public access CLID and callback ~ Calling Line Identification (CLID), callback Access lists ~ Filtering of IP packets according to different criteria (source, destination, port and interface) Stateful Inspection Firewall ~ filtering with monitoring and interpretation of the status of the individual connections RADIUS ~ Central check of access authorization at a RADIUS server (PPP and Login Authentication) Authentication ~ PPP mechanisms H.323 proxy ~ Protection of the Intranet (e.g. by NAT) Content filtering ~ 30 day evaluation licence VLAN ~ Network nodes in different network segments behave like a arbitrary group connected to the same network segment Encryption for PPP ~ MPPE up to 128 bit other up to 168 bit if VPN is licensed VPN - IPSec ~ Max. 5 tunnels inclusive (only for products produced after week 18/2004), more via separate license ~ Powerful encryption up to 256 bits (DES, 3DES, CAST, Blowfish, Twofish, AES) VPN - PPTP ~ Optional ~ Strong encryption up to 128 bits (MPPE), up to 168 bits (DES/3DES, Blowfish) DynDNS / DynVPN ~ Router can still be reached over the Internet in spite of dyn. IP address IKE for IPSec ~ Pre-Shared Keys and X.509 certificate support X.509 ~ X.509 v1/v3 certificates (PKCS#7/8/10, CLRs, SCEP) QoS for IPSec ~ Available PKI Support for IPSec ~ Available NAT Traversal for IPSec ~ Available IPCOMP ~ IP Compression

Ordering Information