home  |  Networking Products   |  about us  |  news  |  contact us  |  careers        search      



Single Port 10/100/1000Mbps UTP Ethernet Test Module

XM-2301 is a Single Port 10/100/1000 Mbps UTP Ethernet Test Module. Optimised Testing - Each test port is supported by independent processor, operating system, memory, and network interface to ensure the performance and flexibility of high throughput and high transaction test applications.

Software Support
  • NuWIN (virtual front panel for NuStreams®)
  • NuApps-2889 (based on RFC2889 and RFC2285)
  • NuFlow (for Layer 2 & 3 QoS Test)
  • NuApps-2544 (based on RFC1242, RFC2544)
  • NuAPI (Application Programming Interface)
  • Customised mass production test programs

  •  


    Click to Enlarge Image
    Quick Download : Product Brief

    Product Features

     
    • 1-Port 10/100/1000 Mbps UTP Ethernet Test Module
    • Dedicated Motorola MPC8245 CPU and 1MB capture buffer for each port
    • Synchronous generation and analysis of layer 2 to 7 traffic
    • Wire speed generation and receipt of layer 2 and 3 traffic
    • Single/burst/multi-burst/continuous packet generation
    • Generation of packets for protocols such as IP, UDP, IPX, TCP, IGMP, MPLS, VLAN, and OSPF etc.
    • X-Trailer for frame data integrity verification Generation of ARP and Ping requests and response to such messages.
    • Real-Time 64-bit counts and frame rates
    • Spread sheet format for convenient observation of statistic counters
    • External file logging for statistics and alerts

    Product Specification

     


    No. of Test Ports
    ~ 1

    Interface
    ~ RJ-45

    CPU and Memory
    ~ MPC8245 / 1MB (per port)

    Speed and Mode
    ~ 10/100 Mbps: Half / Full Duplex
    ~ 1000 Mbps: Full Duplex

    Auto MDI / MDIX
    ~ Yes

    Nway
    ~ Enable / Disable

    Preamble
    ~ 4 ~ 16 Bytes

    Frame Length (w/o VLAN Tag)
    ~ 48 ~ 16,380 Bytes Fixed / Increase / Decrease / Random / Loop

    Data Field
    ~ Fixed / increase / decrease / random in byte or in word; User defined; Pre-defined patterns

    Inter-frame Gap
    ~ Fixed / Random (10 Mbps: 400 ns ~ 2 sec; 100 Mbps: 40 ns ~ 2 sec; 1000 Mbps: 8 ns ~ 2 sec)

    Error Generation
    ~ 10/100 Mbps: No CRC, CRC Error, Alignment Error, Collision, IP Check SumError, Dribble Error; 1000 Mbps: No CRC, CRC Error, IP Check Sum Error

    Collision
    ~ Single / Multi / Excess

    Data Integrity / Sequence Checking
    ~ Yes

    Source / Destination MAC Address
    ~ 48 bits Fixed / Increase / Random

    Source / Destination IP Address
    ~ Fixed / Increase / Random

    IP Generation
    ~ Hardware

    VLAN (VLAN ID / COS Field)
    ~ Fixed / Increase / Decrease / Random

    MPLS (Label / COS / TTL Field)
    ~ Fixed / Increase / Decrease / Random (Up to 2 stack labels)

    Flow Control
    ~ Asymmetric; Response to 802.3x Flow Control Frames (default as reception)

    Capture Buffer Size
    ~ 512 packets (2K bytes / packet)

    Capture Mode
    ~ After / Before / Event / 8 Packets after Event

    Capture Event
    ~ All Condition, CRC Error, DI Error, Serial No. Error, Alignment Error, IP Checksum Error, Trigger 1 ~ 4, Any Defined Packet Size

    QoS Testing
    ~ Up to 4 Priority Queues

    Line Performance
    ~ Wire Speed

    Ordering Information

     
    XM-2301Single Port 10/100/1000Mbps UTP Ethernet Test ModuleWhere to Buy and Price
    XM-2301GSingle Port 1000Mbps Mini-GBIC Ethernet Test Module (w/o Mini-GBIC Transceiver)Where to Buy and Price