|
4 Channel Full-Duplex In-Line Ethernet TAPNuTAP provides a safe, secure and cost-effective way for the deployment of IDS sensor into full-duplex links by aggregating both directions of the full-duplex streams on up to 4 different network segments into a single 1000Mbps monitoring port so that the IDS sensor can see both sides of the conversation on the monitored network segments with only one interface.
Because the IDS sensor is hidden behind the TAP, it's shielded from direct attacks from the link being monitored. Completely passive and non-intrusive to the network segment being monitored; NuTAP provides an access to all network traffic from both side of a full duplex link by allowing network monitoring or analysis tools to be dynamically inserted into the network segment without causing any disruption to the link.
NuTAP can be used with professional analyzer such as NuStreams-2000/600 from Xtramus or third party LAN and security analyzers. Together, they provide an effective way for probing or analyzing full-duplex traffic on single or multiple network links that cannot be achieved by using traditional methods such as Hub, Port Spanning / Mirroring.
| 
Click to Enlarge Image |
 Quick Download : Product Brief
Product Features| | - Provides an invisible, non-intrusive permanent access for dynamic insertion of network monitoring and analysis devices without disrupting links or causing network degradation
- Simultaneous non-blocking forwarding of all TXs and RXs traffic including error packets from up to 4 network segments to a single monitoring port to maximize the port usability of the Intrusion Detection System (IDS)
- Protect the IDS sensor from being attacked by the network segment being monitored
- Removes the need for spanning / mirroring port and avoids problems associated with using such methods for traffic monitoring
- Real-time monitoring, capturing, and analyzing of network traffic
- Compact, lightweight and highly cost effective
|
|
Product Specification| |
Interfaces
~ Network Port: 8x 10/100Mbps Ethernet ports with RJ-45 connectors
~ Monitoring Port: 1x 10/100/1000Mbps Ethernet port with RJ-45 connector
~ Console Port: 1x RS-232 with DB-9 connector
LED Display
~ Status: Link, Speed, Duplex Mode, Tx, Rx
~ Counters: Unicast, Broadcast, Pause, Collision, CRC Error, Alignment Error, Dribble Error, Oversize, Undersize
Power
~ DC 12V; Typical Power Consumption: 6.6 Watt
Temperature
~ Operating: 0 ~ 40 degrees C
~ Storage: 0 ~ 50 degrees C
Humidity (non-condensing)
~ Operating: 0% ~ 85%
~ Storage: 0% ~ 85%
Dimensions
~ 175mm x 85.9mm x 32.6mm
Weight
~ 500 g
|
|
Ordering Information
|