###################--> START LEFT --> ###################-->
|
###################--> -- CENTER> ###################-->
Single Port 1000Mbps Mini-GBIC Ethernet Test ModuleXM-2301G is a Single Port 1000 Mbps Mini-GBIC Ethernet Test Module. Optimised Testing - Each test port is supported by independent processor, operating system, memory, and network interface to ensure the performance and flexibility of high throughput and high transaction test applications.
Software Support
NuWIN (virtual front panel for NuStreams®)
NuApps-2889 (based on RFC2889 and RFC2285)
NuFlow (for Layer 2 & 3 QoS Test)
NuApps-2544 (based on RFC1242, RFC2544)
NuAPI (Application Programming Interface)
Customised mass production test programs
| 
Click to Enlarge Image |
Quick Download : Product Brief
Product Features| | - 1-Port 10/100/1000 Mbps UTP Ethernet Test Module
- Dedicated Motorola MPC8245 CPU and 1MB capture buffer for each port
- Synchronous generation and analysis of layer 2 to 7 traffic
- Wire speed generation and receipt of layer 2 and 3 traffic
- Single/burst/multi-burst/continuous packet generation
- Generation of packets for protocols such as IP, UDP, IPX, TCP, IGMP, MPLS, VLAN, and OSPF etc.
- X-Trailer for frame data integrity verification Generation of ARP and Ping requests and response to such messages.
- Real-Time 64-bit counts and frame rates
- Spread sheet format for convenient observation of statistic counters
- External file logging for statistics and alerts
|
|
Product Specification| |
 No. of Test Ports ~ 1
 Interface ~ RJ-45
 CPU and Memory ~ MPC8245 / 1MB (per port)
 Speed and Mode ~ 10/100 Mbps: Half / Full Duplex
~ 1000 Mbps: Full Duplex
 Auto MDI / MDIX ~ Yes
 Nway ~ Enable / Disable
 Preamble ~ 4 ~ 16 Bytes
 Frame Length (w/o VLAN Tag) ~ 48 ~ 16,380 Bytes Fixed / Increase / Decrease / Random / Loop
 Data Field ~ Fixed / increase / decrease / random in byte or in word; User defined; Pre-defined patterns
 Inter-frame Gap ~ Fixed / Random (10 Mbps: 400 ns ~ 2 sec; 100 Mbps: 40 ns ~ 2 sec; 1000 Mbps: 8 ns ~ 2 sec)
 Error Generation ~ 10/100 Mbps: No CRC, CRC Error, Alignment Error, Collision, IP Check SumError, Dribble Error; 1000 Mbps: No CRC, CRC Error, IP Check Sum Error
 Collision ~ Single / Multi / Excess
 Data Integrity / Sequence Checking ~ Yes
 Source / Destination MAC Address ~ 48 bits Fixed / Increase / Random
 Source / Destination IP Address ~ Fixed / Increase / Random
 IP Generation ~ Hardware
 VLAN (VLAN ID / COS Field) ~ Fixed / Increase / Decrease / Random
 MPLS (Label / COS / TTL Field) ~ Fixed / Increase / Decrease / Random (Up to 2 stack labels)
 Flow Control ~ Asymmetric; Response to 802.3x Flow Control Frames (default as reception)
 Capture Buffer Size ~ 512 packets (2K bytes / packet)
 Capture Mode ~ After / Before / Event / 8 Packets after Event
 Capture Event ~ All Condition, CRC Error, DI Error, Serial No. Error, Alignment Error, IP Checksum Error, Trigger 1 ~ 4, Any Defined Packet Size
 QoS Testing ~ Up to 4 Priority Queues
 Line Performance ~ Wire Speed
|
|
Ordering Information
|
###################--> END -- CENTER> ###################-->
###################--> END Content--> ###################-->