|
2-Port 10/100/1000Mbps Ethernet Test ModuleXM-23R2 is 2-Port 10/100/1000 Mbps Ethernet Test Module with RJ-45/Mini-GBIC connectors. The major benefits include optimisation for testing Ethernet devices and layer 2 to 7 traffic simulation, including any user defined pattern or recently developed protocol etc.
Software Support
NuWIN (virtual front panel for NuStreams®)
NuApps-2889 (based on RFC2889 and RFC2285)
NuApps-2544 (based on RFC1242, RFC2544)
NuAPI (Application Programming Interface)
Customised mass production test programs
| 
Click to Enlarge Image
|
 Quick Download : Product Brief
Product Features| | - 2-Port 10/100/1000 Mbps Ethernet Test Module with RJ-45/Mini-GBIC connectors
- Synchronous generation and analysis of layer 2 to 7 traffic
- Wire speed generation and capture or analysis of Ethernet traffic
- User pattern based packet generation
- Single / burst / multi-burst / continuous packet generation
- Generation of packets for protocols such as IP, UDP, IPX, TCP, IGMP, MPLS, VLAN, OSPF and user-defined protocols
- Buffer Size: 32MB per port (up to 256k frames)
- Full protocol decode suite supported by NuWIN
- Capture Triggers: 8 Triggers per port with support logic operation
- Plenty of counters including standard RMON, User trigger and other useful counters
- X-Trailer for frame data integrity verification
- Various protocols response including ARP and Ping
- BERT for transmission quality assurance for telecom users: PRBS 2^7-1, 2^15-1, 2^23-1, 2^31-1
|
|
Product Specification| |
Ports per Module
~ 2
Connector Type
~ RJ-45
Speed and Mode
~ 10/100Mbps H/F Duplex Mode ; 1000Mbps Full Duplex Mode
CPU
~ MPC852T
Preamble
~ 4 ~ 16 Bytes
Frame Length(w/o VLAN Tag)
~ 48 ~ 8192 Bytes Fixed / Increase / Random / Loop / Decrease
Data Field
~ System defined/User defined/Random
Inter Frame Gap
~ Fixed /Random ; 1000 Mbps: 48 ns ~ 0.2 sec
Error Generation
~ No CRC, CRC Error, Alignment Error, IP Checksum Error, Dribble Error
Data Integrity / Sequence Checking
~ Yes
Source / Destination MAC Address
~ Fixed / Increase / Decrease / Random ; Variable fields can be set depends on UI, max length of each field is 32-bit
Source / Destination IP Address
~ Fixed / Increase / Decrease / Random
IP/TCP Generation/Analysis
~ Hardware
VLAN(VLAN ID / COS Field)
~ Fixed / Increase / Decrease / Random
MPLS(Label / COS / TTL Field)
~ Fixed / Increase / Decrease / Random ; (No. of labels not limited)
Flow Control
~ Default as reception
Capture Buffer Size
~ 32MB per port, (up to 256k frames)
Capture Mode
~ Event
Capture Event
~ All Condition, CRC Error, DI Error, Serial No. Error, Alignment Error, IP Checksum Error, Trigger 1 ~ 8, Trigger Logic, Any Defined Packet Size
QoS Testing
~ 8 Priority Queues
Line Performance
~ Wire Speed
|
|
Ordering Information
|