| |
Standard
~ IEEE 802.3ae-compliant 10GBASE-R (LAN)
Interface
~ Pluggable XFP (ordered separately)
Speed and Duplex Mode
~ 10Gbps / Full Duplex Only
Preamble
~ 8 Bytes (Fixed)
Frame Length(w/o VLAN Tag)
~ 40 ~ 16,384 Bytes (without CRC): Fixed / Increment / Decrement / Random / Loop
Transmit Mode
~ Single / Burst / Multi Burst / Continuous
Inter-frame Gap
~ 9.6 nSec. ~ 1.073 Sec. Unit: Packets/Sec, %Utilization, Random, Databits/Sec, Frame bits/Sec, Total bits/Sec, nSec, uSec, mSec, Sec
Data Pattern
~ All zeros, All ones, Custom, Random, IP, UDP, UDP-RTP, TCP, ARP, RARP, ICMP, IPX, Pause, 555, AAAA, Incrementing byte, Incrementing word, Decrementing byte, Decrementing word, F0F0, 0F0F, FF00, FFFF0000, 0000FFFF, 8-F¡¦s 8-0¡¦s, 8-0¡¦s 8-F¡¦s
Error Generation
~ CRC Error, IP Checksum Error, Undersize, Oversize
Data Integrity Verification / Sequence Checking
~ Yes
Source / Destination MAC Address
~ Fixed / Increment / Decrement / Random
Source / Destination IP Address
~ Fixed / Increment / Decrement / Random
IPv4 / IPv6 Support
~ IPv4
VLAN Stacking
~ Up to 4 VLAN Tags
Hardware Counters
~ Rx Frames, Rx Bytes, Undersize, Oversize, Broadcast, Multicast, Unicast, Pause, VLAN, IPv4, CRC Error, DI Checksum Error, Serial No. Error, IP Checksum Error, Rx ARP Requests, Rx ARP Replies, Rx ICMP Ping Requests, Rx ICMP Ping Replies, RxUDF 0 ~ 7, Tx Frames, Tx Bytes, Tx ARP Requests, Tx ARP Replies
RxUDF
~ Eight trigger states are provided for counting packets that appear in specific conditions.
QoS Testing
~ Up to 8 Priority Queues
Line Performance
~ 10.3125 Gbps
|
|