CopperLink CL1314 Series auto-rate Ethernet Extender Kits can interconnect remote LANs up to 6.9Kms apart over single twisted-pair cable. Model CL1314/R is a Remote device which can be paired with a CL1314/L Local unit.
Designed to easily and inexspensively connect remote LANs over single twisted-pair copper cable, CopperLink™ CL1314 Series Ethernet Extenders deliver can interconnect over very long ranges of up to 6.9 kilometres (4.6 miles). Model CL314/R is a Remote Ethernet Extender device which can be paired with a CL1314/L Local device. Both products offer a RJ-45 line port and an integrated 10/100Mbps 4 port switch.
Featuring plug-and-play installation, the CL1314 CopperLink Ethernet Extenders leverage existing copper twisted-pair infrastructure to interconnect Ethernet devices and networks at high speeds over long distances.
Whether you need connect to a remote office or private-network backbone to a corporate LAN—or interconnect such network-enabled devices such as PCs, digital sensors and IP cameras—Patton Ethernet Extenders offer the industry's optimum combination of speed and distance.
Operating at layer 2 of the OSI model (data link layer), the CL1314 transparently passes all higher-layer protocols—including VLAN tagging, multicast addressing, VPN passthrough for IPsec, and all IP-video compression schemes. All common industrial protocols are also transparently supported, including MODBUS/TCP and PROFINET IO.
|•||Interconnect remote LANS over ranges up to 6.9Km (4.3 miles) over a single twisted-pair connection|
|•||Plug and Play - zero configuration to operate with auto-sensing 10/100 Ethernet full or half duplex ports|
|•||Multi-rate Selection: Just plug the units in and select the ideal user configurable rate for your application|
|•||Switch-selectable rate mode options optimise rate and reach for the noise environment, wire gauge/type and length|
|•||Transparent LAN Bridging - Passes higher layer protocols such as 802.1Q VLAN tagging|
|•||Fully transparent to industrial protocols such as MODBUS/TCP and PROFINET IO|
|•||Integrated 4 port Ethernet 10/100Mbps Switch|
|•||Automatic Learning, Aging, and filtering - keeps local traffic local|
|•||Transparent to higher layer protocols, including industrial protocols such MODbus/TCP, ProfiNET IO|
|•||Single twisted pair|
|•||Rates from 192 kbps to 5.7 Mbps, selectable in all 64 kbps increments up to 5.7 Mbps|
|Panel LED Status Indicators|
|•||WAN: Link, LAN (Ethernet): Link/Act, Power|
|•||for rates from 192 to 2.3 Mbps|
|•||for rates above 2.3 Mbps|
|•||RJ-45 on copper line side|
|•||4 x 10/100 Etherne|
|•||Shrouded male IEC 320 power connector|
|•||Transformer coupled, 1500 VAC isolation|
|•||DIP switch, Telnet console|
|•||External 90–260 VAC, 50–60 Hz (Universal Input)|
|•||32° to 122°F (0 to 50°C)|
|•||5 to 95%, non-condensing|
|•||0 to 15,000 ft (0 to 4,600 m)|
|•||4.7 x 1.52 x 5.00 in.(106 x 390 x 127 mm)|
|•||2.0 lbs (1.0 kg)|
|•||FCC Part 15A, CE Mark per EMC directive 89/336/EEC and Low Voltage Directive 73/23/EEC|