This product is no longer stocked by Alloy

Eaton

EDX3000HA

True Online UPS, 3kVA, Tower Case 4x IEC+Wired outputs, C20 Input, Serial/SNMP

The EDX3000HA, an Eaton E Series DX Online UPS, protects critical applications from downtime and data loss via an architecture that completely isolates output power from input anomalies. This 3kVA rated UPS has a hardwired plus 4x IEC power outlets.

Eaton
discontinued
Alternate Text

This product is no longer stocked by Alloy

Eaton

EDX3000HA

True Online UPS, 3kVA, Tower Case 4x IEC+Wired outputs, C20 Input, Serial/SNMP

The EDX3000HA, an Eaton E Series DX Online UPS, protects critical applications from downtime and data loss via an architecture that completely isolates output power from input anomalies. This 3kVA rated UPS has a hardwired plus 4x IEC power outlets.

Description

The EDX3000HA, an Eaton E Series DX Online UPS, protects critical applications from downtime and data loss via an architecture that completely isolates output power from input anomalies. This 3kVA rated UPS has a hardwired plus 4x IEC power outlets.

Eaton's EDX3000HA is a True Online UPS with high-frequency double-conversion architecture incorporates rectifier and inverter stages that completely isolate output power from all input power anomalies. The UPS has a wide input voltage range (120V right up to 300 volts) appropriate for the harshest electrical environments, and is optimised for compatibility with engine generator sets. This affordable online UPS is housed in a robust tower case, delivers perfect sine wave output and guarantees a consistently high level of power quality. In the event of an overload or UPS fault, the UPS automatically transfers the load to utility AC power. The EDX3000HA has an battery capacity of 3kVA/1.4kW and a hardwired power output plus four IEC 10amp power output sockets - capable of supporting connected devices for up to 16 minutes at 50% load.

The EDX3000HA is a model from Eaton's E Series DX Online UPS Series. Single phase models in the series offer up to 10kVA/7kW battery capacity. 6kVA and higher models can be run in parallel for increased capacity and N+X redundancy, with only an optional Parallel Cable required. The following features are supported in addition to those mentioned above: Cold start-on battery power supports portable power applications; a high performance battery charger reduces recharge time and prevents disturbances and faults on the distribution system by correcting the power factor and not propagating faults on the distribution system through back-feed protection; Input/output jacks for telephone, modem, internet dataline surge protection; intuitive front-panel user interface and audible alarms provide status indication for general fault, battery, inverter, bypass and load/battery-charging levels; an RS-232 port is provided for connection of any E Series DX UPS to a server for local monitoring; Eaton's WINpower power management software is supplied with the UPS, and can be used to alert users of a power event or pre-specified condition, automatically shut down servers and remotely supervise and control UPS solutions. Finally An optional Web/SNMP or AS400 Relay network administration EDX 1 Phase Card can be installed in a rear panel slot.
Features
EDX3000HA: True Online Tower UPS with 3kVA battery capacity and 4x IEC plus hardwired power outlets
E Series DX UPS: Online double-conversion topology assures maximum reliability
Wide input voltage range appropriate for the harshest electrical environments
High-performance battery charger
Tested for generator compatibility
Automatic bypass for fault tolerance
Cold start-on battery power for portable power applications
Intuitive front-panel user interface for consistent status indication
WINpower software for power monitoring and server auto-shutdown
E Series DX UPS models provide up to 30 minutes battery backup at 50% load
Run up to three 6 or 10kVA models in parallel for increased capacity and redundancy